You guys! This weather has me all sorts of annoyed. We have had like 3 days of sunshine in the past 3 months. The storms just keep rolling in and ruining my plans for my patio. I have all the stuff to redo it, took my old table apart (sadly), have mostly everything prepped...and yet it sits like an empty square with no love. haha. Anyway. Hopefully I'll be able to share something in the next week. Fingers crossed! 

Until then, I have been meaning to share with the tutorial on how to make your very own vintage style cutting board...for practically free. Well, at least for me. I have a slew of unused scrap wood just waiting to be used on projects like this. 

Here's how I did it...trust me, it's so easy and only uses one basic power tool (besides your drill) :)

Grab a 1x12 piece of wood and roughly sketch the top of what you want your cutting board to look like. Try to make it symmetrical. If you aren't good at sketching and have a cutting board you already love, us that and trace over it adjusting your lines as you need. 

 Using a jigsaw, cut along the lines. And yes, this is when mine resembled a pumpkin. Don't worry, I make sure to remember it every time I look at it. haha. 

 The board is gong to be pretty rough, so go through and sand the edges.

 Since this is for pure decoration and not food-grade, I stained mine with Minwax Dark Walnut.

 I then placed a piece of painters tape about 2 inches down from the handle and painted the top portion with a white craft paint.

 I drilled a hole in the middle and strung a little piece of jute. 

Done! Seriously like a 15 minute project. 

I have a slight obsession with cutting boards that I have had to cure. I have no place to put anymore no matter how much I want to stuff another one somewhere. I think I am reaching hoarder status over here with some of my stuff. No but for reals...you should see my basement :/ Or no...probably not, I wouldn't let you :)

I just love the instant farmhouse and vintage charm cutting boards add to a dining room or kitchen. You can easily add some fun vintage designs on them too, or a little mending plate for charm. These one's I actually bought, but you can easily duplicate the look on your own now that you know how to make one! :)

Pin for later:

Continue reading

Share:

Spring to me is all about flowers, greenery, and pots. I love terracotta pots, but I feel like the actual color has it's place...in small amounts for me. I do love how they look when they have been painted and have good age to them. I have been faux aging my terracotta pots for some time now and thought I would share the super easy way to do it!

My favorite place to get the pots are at Hobby Lobby. These ones don't have a large lip to them like the others you may find at common hardware stores. They are just smooth all the way up and down. Plus, they are super cheap when you catch them at 50%...which is usually every other week. The smaller pots are about $1 and the larger one shown below is $1.50.

 Okay....ready for my secret ingredient? This makes aging the pot so easy and fast. Petroleum jelly. Yep. Get a small dab on your finger and run it along the top and bottom rim of the pot. If you want more aging, then continue it down into the middle on some parts of the pot. You don't need a lot. Just enough to change the color of the pot.

 Next, paint it. I have used many types of white paint and not one is any better than the other. Depends on the look you are going for with a matte finish or glossy. Matte is better for the aged look so go for a crafty acrylic in that case. On these pots, I used a satin enamel in white. Since it's satin, even though it's enamel, it doesn't show a gloss.

 Do two coats of paint. The terracotta will soak it in pretty quickly allowing for a quicker than normal dry time. Just make sure it doesn't sit to long before the next step or else the petroleum jelly will also absorb and make the sanding a little more difficult.

Now, grab a square of sand paper and lightly sand the pot. You'll notice quickly where the petroleum jelly sections are since it will come right off. Work on that area gently until no more paint comes off and continue on until you think you got all of it.

 Here's the before and after of the pots.

 How easy and fast is that? I think it's about 30 minutes per pot which includes dry time. You can easily get in 5 to 8 pots in that half hour...you know, if you really love pots to make that many :)

 As you can see, I do! I made them in all different shapes and sizes. 

 I had fun playing around with my collection on my dining room table. One would think that I'm a plant lady, but I definitely have a black thumb of death. So, the fact that these are still green means two things: One, I just got them. Two, they will not be staying with me or I got them as a present :) The three main plants are actually going as teachers presents for the end of the school year which I'll share more about below.

 And again, playing with how to display these. It was super fun adding something different and unique to my tablescape that just screamed spring......while it was snowing outside. Yeah. Don't get me started on that. The first day of summer break for my littles and the highs are in the 40s...

 Here's how I used a few of these pots for teacher gifts. The ones on the table above are called Moondrop plants, and this one below is a succulent.

 I tied them all with some jute, adding a cute little tag that said: Thank you for helping me grow.

 And done! The total for each was under $5 which includes the pot. Not bad!

I don't know about you, but teacher gifts are always so hard for me! What are your go-to ideas? Comment below and let's share! :)

PIN FOR LATER:

Continue reading

Share:

The below post contains affiliate links.

I'm not sure what to really call this thing. It's like a door, but miniature. Heavy like a door for sure :)  I'm just using it on my porch, but there are a ton of different ways you can display it and put it in your house. I found something similar to this at a vintage sale I went a few months back, and they were asking gobs of money for it, like $130. Yeah. It was so cute, me and my friend had to make one for ourselves. We made both of ours for about $16 each...minus the wreath and bow. So, total, maybe in the low $20s.

I've been loving my porch this past year ever since I redecorated it and thought this would be the perfect addition.

The supplies I used:
1 piece of bead board cut at 18x32" (I bought a 32"x48"' piece and cut mine to size)
1 piece of 1/4" plywood 18x24" (I bought a 2x4' piece and cut it to size)
2 - 2x4s miter cut so the longest side is 57"
2 - 2x4s miter cut so the longest side is 23.5"
1 - 2x4 cut at 16.5"
Nail gun/ 1" nails
1" screws
Mending plates
Paint
Java glaze
Vinyl "welcome" (got mine from the Silhouette store)
Ribbon or bow
Hanger
Wreath

First step: If you didn't have the lumber store cut your wood yet, do that. I used my Dremel Ultra Saw to cut both my bead board and plywood to size.

 I then lined up the bead board and plywood on the ground and left a little gap in the middle. I measured the length of the two boards first and made that the longest length of the two side 2x4s (57"). I then placed those together an decided on the width of the top and bottom boards. (that's where I got the measurements from above) I made sure my 2x4s overlapped the plywood and bead board by about an inch on the sides.

 Once the boards were cut, I laid them on a flat surface and squared them.

 I then used mending plates to secure all of them together. You can also use wood glue and a 2" screw through the side to help it stay secure.

 I then measured the middle section and cut out the middle 2x4 to fit, which was 16.5". At his point, I also measured about 22" down from the top on both sides and placed the top of my 2x4 on these points. I didn't do this until I realized I needed to at the end, but at this point, use mending plates to secure the 2x4 middle section to the sides.

 I placed the plywood on the top and secured it in place using my nail gun.

 I then placed the bead board on the bottom and secure that too. At this point, I decided to secure the corners with the screws to give it more stability.

 Now that it was all together, I painted it with some white latex paint.

 I decided to give it a little wear and distressed the edges and some of the wood with sandpaper.

 I used some glaze on the edges and in the middle part on the bead board.

 I made my bow and secured it to the center of the middle 2x4. I also added the hanger on the bead board for my wreath.

 I chose this "welcome" from the Silhouette design store and cut it out with my Silhouette. I used some transfer tape to place it on the board.

 And here it is all done!

 You can't see it very well on my porch from this angle, but I think it added the perfect 'welcoming' touch :)

 I did end up scrunching up the bow a little bit to give it more bounce. I wasn't too happy with the rigidity of it before.

 The wreath I got from Hobby Lobby. I don't recall how much that cost, but I know they still carry it (at least as of me writing this post :) ).

This porch has come a long way since this:

Yeah. It seriously looked like that, maybe worse for years :/ Nothing like a first impression coming into my house, huh? lol Sometimes things just tend to get neglected....which makes it that more fun to spruce them up! :)


pin for later:

Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Continue reading

Share: