This post contains affiliate links.

I shared with you all my updates to my patio over the past month, and the biggest change to date was this short privacy wall and planter box. 

I say biggest change because it is hiding THE biggest eyesore :) (and not just the dog butt, ha!) 

We spent a whole bunch of money on landscaping gone wrong. A rock retaining wall was poorly built, things didn't get figured out in enough time before a fence was put in. Then there was no way to get a bobcat or anything in to move these half ton boulders....anyway. It's one of the biggest aggravations I have with my house and yard. And the worse thing? I stare at it every day from the top of my patio stairs, from my patio, from the playhouse, from my neighbors yard...etc etc etc. Serious. The bane of my existence at times. We have some ideas to fix it up, but nothing is getting done. I don't have the muscles it takes to move these puppies....plus, I have no idea what to do. I would probably get smooshed. As you can see in the picture above, my husband has started using it as a place to throw the lawn shavings. So, that's fun. Anyway. Long story long :) I decided to fix it on my own. By covering it up! 

Here's how I did it. First of all, I started with my base that was already there. I made these privacy screens a couple of years ago from some drop cloths and 4x4s. You can see the full tutorial on how to make them here. 

Next, I cut another 4x4 at 37" placed it in the middle of the expanse between the taller 4x4s of the privacy screen. I was going to dig this one in, but opted not too. The other 4x4s are secured into the ground, so I figured I could get away without having to do this one. I placed the first 5" cedar fence board on the bottom, making sure it was level. Using 2 pieces of 1x2 cut at 2.5" each, I spaced each cedar board all the way up to the top of the shorter 4x4.
 To create the planter box section, I placed the last piece of board on top of the other without the space. Secured the bottom inch or so into the short 4x4 and of course the 4x4 on the other side. I then cut a 1x4 to fit the expanse, which was about 94" for me. 
 I sat this on top of the middle 4x4.
 To make sure it had something else to sit on, I placed a small cut 1x4 on both the taller 4x4s, making sure everything was level. I then secured the horizontal 1x4 into these "cleats". 
 I continued the boards on until I hit the last 4x4. So, with this, I have three 4x4s that are tall to hold the curtains. Then two 4x4s that are shorter that go in middle of each expanse. 



I finished it all up by creating the same look on the back, but staggering it in between the front gaps.  

I then stained all the wood Dark Walnut by Minwax.


 If I could only tell you how much of a difference this has made. We would never eat out here before. Never. Okay, twice. But 2 times in 10 years is pretty much never. Even though my eyesore technically still exists, it's just a sore now since my eye no longer sees it all the time :) 
 This space is a great place to spend the hot evenings. To add to the ambiance, I strung solar lights along the planks. 

Now for reals though...what would you do with the eye sore? No sprinkler lines can run through it since it's all stacked up boulders now filled with dirt and dried grass. It's probably about time we really figure it out! :)


Follow me on my social for sneak peaks, live videos, and fun new things that are going on!

 

Pin for later:





Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

I was provided product by DecoArt and compensated to write about this project, but all thoughts, opinions, and ideas are my own :)

I'm bringing it back to my roots with this project, and it feels so good! It's so easy to hop onto Amazon, buy something, and have it delivered two days later (sometimes that same day!). But, you know what feels even better? Making it on your own! I have had these pillows (not just from Amazon but varying sources) on my wish list for awhile now. I had them sitting in my cart, waiting to buy them, knowing full well I could make them for soooo much cheaper. Well, I finally did it, and I'm so happy with the results! The best part? They were made using upcycled button down shirts! This project would be close to free if you already have some in your closet. I don't know about you, but that's always the best! Plus, making them with shirts cuts out like 75% of the steps on how you would normally make a cover! 
Of course, once you make the covers, you need to decorate them! I used DecoArt's SoSoft Frabric Acrylics in Lamp Black, Antique Gold, and Brown. 

Before you start, make sure that the shirts are washed, not using any softeners. Once they are dried, iron them. I used two different styles of button down shirts, long sleeve and short sleeve. They both work. My only recommendation when picking out the shirt is to make sure they are a men's XL or XXL. That will give you the max amount of fabric to work with without having to cut into the armpits :) 
Cut out a piece of cardboard at 19"x 19". This will be for a 18"x18" pillow cover. If you want bigger, then add your needed inches. I usually put a 20"x20" insert into a 18" pillow cover so it fills it out nice and plump! Turn the shirt inside out and lay on a flat surface, button side up. Place the cardboard directly in the middle of the shirt, trying to line up the buttons in the middle of the cardboard. Trace with a pen or fabric marker.
 Remove the cardboard and carefully pin in place, making sure to keep all wrinkles out of both top and bottom layers. 
 Next, sew the square! Make sure the hem is about 1/2" in around the entire piece. 
 When you are done, turn it inside out! Now you have the closure on the back with the buttons. Genius, right?! Easiest pillow cover ever! 
 Now it's time to add some paint! To protect the backside of the pillow, place a 18"x18" piece of cardboard into the pillow cover. 
Now for the three paint tutorials: 

Decorative Lined Pillow Cover Tutorial
For the first pillow, I lined up another piece of cardboard along the front, making sure it was equidistant from the bottom edge. I went with a hand drawn look on this one. Using the SoSoft Lamp Black and a small tipped paint brush, I painted a line down the middle of the cover. I used the cardboard as a guide to keep it straight. 
 On this first line, I just added little leaves along it. 
 I then added more lines about 2.5" apart, adding different decorative lines. 

 When I got to the 2nd to the last line on one side, I switched colors to the SoSoft Antique Gold and added the little circle leaves in the opposite direction. I like doing this just to shake things up a little bit :)
 And there it is! 
Faux Leather Pillow Cover Tutorial
 Now for the second design. This was the easiest out of the three. I measured up 10.5" on both sides of the front of the cover and placed some painters tape to make a line. 
 I then painted the bottom portion of the pillow cover SoSoft Brown. When this was fully dried, I pulled it off of the cardboard, and then added another coat of the SoSoft Brown. The paint will want to stick to the cardboard, so that's why I did this. You can also use some foil over the cardboard to prevent this :) 
Once the second coat is dry, take out the cardboard and feel the amazing results! Serious. It's a pretty good looking faux leather. I was so pleased! I'll be making more of these for sure!

Arrow Pillow Cover Tutorial
 Now for the last design. This one requires a little more measuring, but I tried to make it easy for you :) Measure 4" in from each side and place a piece of painters tape along those marks.
 Grab an 18" piece of cardboard and mark every 1.5". Line this up 2" in on your cover. Using a small tipped paint brush and the SoSoft Lamp Black, paint about 1" diagonal lines. 
 Remove the cardboard and paint the opposite diagonal lines. Do this on both left and right sides of the cover.
 Now place a piece of tape right down the middle. This will give you two more areas to work with, doing the same thing.
 Here's what it will look like.


I just love how all of these came together. But, seriously you guys, that brown one blew my mind. I could not believe how this wasn't hard at all. It has the best texture and is so soft (no pun intended).
The best thing about this, no heat-set is required and it's washable! Just turn it inside out and put it on the gentle cycle, and dry on low heat. 

Want more inspiration like this from DecoArt and other amazing bloggers? Follow here!
www.decoart.com
Facebook
Instagram
Pinterest




Follow me on my social for sneak peaks, live videos, and fun new things that are going on!


Pin for later:





Disclosure of Material Connection: I received one or more of the products or services mentioned above for free in the hope that I would mention it on my blog. Regardless, I only recommend products or services I use personally and believe will be good for my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.” Disclosure of Material Connection: This is a “sponsored post.” The company who sponsored it compensated me via a cash payment, gift, or something else of value to write it. Regardless, I only recommend products or services I use personally and believe will be good for my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”